Connect a Hanwha camera to VISEC.
Hanwha Vision (Wisenet, formerly Samsung) cameras have ONVIF switched on by default, so most appear in VISEC's scan straight away.
Press scan.
VISEC searches your network for ONVIF cameras and lists what it finds. If your Hanwha camera already has ONVIF switched on, it appears here and you are watching live in a few seconds — nothing below is needed.
If the camera does not appear.
Menu names move around between firmware versions, so treat these as the place to look rather than an exact path.
-
Open the camera
Enter the camera's IP address in a browser and sign in as admin.
-
Confirm ONVIF
It is enabled by default. You can check under Network › ONVIF in the web interface if it does not appear.
-
Check the ports
Under Basic › IP & Port, keep HTTP on 80 and RTSP on 554 unless you have changed them on purpose.
-
Scan from VISEC
Press scan, pick the camera and sign in with the camera's admin account.
Once it is connected.
- Watch it liveOn its own or beside your other cameras, across up to 8 monitors.
- Record on motionChoose the part of the picture that matters and how sensitive it should be.
- Get an emailA snapshot the moment motion starts, so you know without watching.
- Read number platesPlate recognition is included in every license, including the free one camera license.
Try it on your Hanwha camera tonight.
The complete software, free for life on one camera. No card, no email, no trial clock.