Connect a GeoVision camera to VISEC.
GeoVision IP cameras support ONVIF, though on some firmware it has to be switched on before other software can see the camera.
Press scan.
VISEC searches your network for ONVIF cameras and lists what it finds. If your GeoVision camera already has ONVIF switched on, it appears here and you are watching live in a few seconds — nothing below is needed.
If the camera does not appear.
Menu names move around between firmware versions, so treat these as the place to look rather than an exact path.
-
Open the camera in a browser
Sign in with its administrator account. GeoVision cameras ask for a password to be set on first use.
-
Look for the ONVIF or RTSP setting
It usually sits in the network or advanced section. Enable ONVIF where the option exists.
-
Check the stream format
Set the stream to H.264 or H.265 rather than a proprietary format, so any software can read it.
-
Scan from VISEC
Press scan, pick the camera and sign in.
Once it is connected.
- Watch it liveOn its own or beside your other cameras, across up to 8 monitors.
- Record on motionChoose the part of the picture that matters and how sensitive it should be.
- Get an emailA snapshot the moment motion starts, so you know without watching.
- Read number platesPlate recognition is included in every license, including the free one camera license.
Try it on your GeoVision camera tonight.
The complete software, free for life on one camera. No card, no email, no trial clock.